SMALLRIG 4236 4" SUCTION CUP CAMERA MOUNTING SUPPORT KIT FOR VEHICLE SHOOTING

SmallRig 4" Suction Cup Camera Mount Kit for Vehicle Shooting 4236 consists of a 4" suction cup, a magic arm and a dust cover. In particular, the robust and wear-resistant suction cup, made mostly of NBR, can work at -20℃ to 60℃. It is not easily deformed, is air-tight, and is suitable for clean, dry, smooth surfaces. With powerful suction force, it works with the magic arm to carry gear weighing as much as 3kg. The aluminum alloy suction cup camera mount features 1/4"-20 threaded holes, 3/8"-16 threaded holes, and ARRI 3/8"-16 locating holes that support 3757, 3873, 3874, 2906B, 2070B, and 2115C.

It is manually pumped and locked, with a warning-line indicator to ensure safety and reliability. When not used, put on the dust cover for longer service life. In vehicle or indoor time-lapse shooting, the magic arm quickly connects to the suction cup via the NATO clamp on one end and to a camera on the other. Compatible cameras include Sony ZV-E10, Canon EOS M50, GoPro11 / 10 / 9 (in Cage 3084B), and DJI Action 3 (in Cage 4119).

1. Load capacity up to 5kg on a vehicle running at or below 80km/h;
2. All-in-one NATO clamp, quick-release suction cup and magic arm;

Note:
1. Suitable for clean, dry, and smooth surfaces, not for rough, wet, uneven, dirty, or fragile surfaces;
2. When in use, please ensure the suction cup and filter cotton are intact and clean;
3. Please apply it carefully to coated surfaces;
4. When the warning-line indicator shows, it means vacuum loss. Pump the plunger until 100% vacuum pressure;

Disclaimer: Please mount it onto recommended surfaces and check at least every two hours.

Compatibility: Universal

4" Vacuum Suction Cup x 1
Magic Arm x 1
Silicone Ring x 2
Action Camera Mount x 1

Product Dimensions: 139.6 x 105.8 x 50.2mm
Package Dimensions: 162.0 x 121.0 x 71.0mm
Product Weight: 355.0 ± 5.0g
Package Weight: 378.0 ± 5.0g
Material(s): Aluminum Alloy, NBR, ABS, Stainless Steel