Camera module VTO4202F-P

Features:• Anodized front aluminum panel; IK07• Supports voice and video communication• 2 MP high definition fisheye camera with 160° view range• Access control function; controls two locks• Compatible with 2-wire interface and RJ45 interface• Surface mount and flush mount• IP65 (Apply silica gel to gaps between the device and the wall. Liquid sodium silicate is recommended. For details, see the quick start guide.)Technical Specifications:System• Main Processor SoC processor• Operating System Embedded Linux operation system• Network Protocol IPv4, RTSP, RTP, TCP, UDP, SIP, P2PBasic• Camera CMOS Low illumination 2MP HD colorful 160° fisheye camera• Angle of View H:160°, V:82°, D:180°• Focal Length 1.95 mm• WDR• Noise Reduction Noise suppression and echo cancellation• Video Encoding H.264• Frame Rate PAL: 25 fps; NTSC: 30 fps• Video Bit Rate 256K to 2M• Light Compensation IR light• Day/Night Switch Yes• Audio Encoding PCM G.711 A G.711 U• Audio Input Built-in omnidirectional microphone• Audio Output Built-in loudspeaker• Audio Bit Rate 16Khz 16bitFunction• Communication Methods: Digital communication• Unlock Mode Remote unlocking• Auto Snapshot Yes• Leave Videos or Text• Messages Yes• Web Configuration YesPerformance• Housing Material AluminumPort• RS-485 Port 1 RS-485 half-duplex port• Alarm Output Port 1• Power Output Port 1-ch 12 VDC output 100mA• Unlock Button Exit button for opening the door• Door Status Detection Detects door magnetic status• Door Lock Control NC/COM/NO• Ethernet Port 10/100 Mbps self-adaptive Ethernet/2-wireAlarm• Tamper Alarm Tamper alarmRegular• Ingress Protection• IP65 (Apply silica gel to gaps between the device and the wall. Liquid sodium silicate is recommended. For details, see the quick start guide.)• Appearance Color Silver• Housing Material Aluminum• Power Supply Mode 12 VDC/2-Wire IP Inteface/PoE• Installation Method Surface mount and flush mount• Accessory Mounting box• Dimensions 100mm×100mm×49.30mm (3.94"×3.94"×1.94")Protection Grade• IK07, IP65 (Apply silica gel to gaps between the device and the wall. Liquid sodium silicate is recommended. For details, see the quick start guide.)• Working Temperature -20°C to +60°C (-4°F to +140°F )• Working Humidity 10%RH–90%RH• Power Consumption ?12W• Net Weight 0.35kg (0.77 lb)• Gross Weight 0.4kg (0.88 lb)