Classic 5 Monitor Pack

studio listening set - pair of KRK Classic 5 dual-band active monitors, 5" + 1" transducers, 50 W biamping, pair of XLR-XLR signal cables, power cables, pair of damping pads with elevation

Classic 5 Monitor Pack

is a listening set containing a pair of KRK Classic 5 studio monitors, two XLR(m) - XLR(f) signal cables, two power cables and a pair of elevation foam spacers. It's ideal as an alternative listening solution for professional studios, home studios, music production, post-production AV studios, dubbing, sound check stations and other audio productions.

• classic 5 Monitor Pack set
• pair of Classic 5 monitors
• two XLR-XLR signal cables
• two power cables
• pair of damping pads with elevation
• classic 5 monitors
• bi-amp amplifier with low distortion
• 50 W power (30 + 20 W)
• 5" bass woofer, 1" tweeter
• input connectors - XLR, TRS 6.3 and RCA
• bass and treble control
• volume control

The monitor set of two active monitors, cables and pads allows you to instantly install professional listening in your home or professional studio. Thanks to the input cables, you can connect the monitors symmetrically to all professional monitor controllers, mixers or sound cards.

kRK Classic 5
monitorsare the reincarnation of one of the best-selling Rokit 5G3 studio monitors. The third generation of Rokits, on which the Classic 5 is based, has brought a number of innovations over its predecessors. These include a redesigned Class A/B amplifier with higher output, lower distortion and lower noise. Another significant improvement is a new tweeter that sounds cleaner and has a range of up to 35 kHz. The monitor's cabinet has also been changed to address problems of unwanted diffraction and resonance thanks to more rounded edges. A redesigned bass reflex extends and enhances the lowest frequencies. The monitors deliver a more precise frequency response and richer stereo image.

high-quality input cables
With two high-bandwidth XLR(m)-XLR(f) balanced cables, you can connect the monitors to any monitor controller, mixing console or sound card. The cables guarantee you the highest possible sound quality with reduced external influences.

foam monitor pads
The set also includes two foam monitor pads. Thanks to them, you can place the monitors on a desk, monitor stands, the raised part of a mixing console, or on other monitors without causing resonances and interference between the monitor and the pad. In this way, accurate and precise reproduction of Classic 5 monitors can be achieved without any interference.

features of Classic 5 monitors

• dual-band active monitor
• type A/B amplifier
• biamping
• frequency division: 2.6 kHz
• distortion (THD+N): < 0.1% THD+N (over the entire frequency range)
• noise figure: >94 dB
• input connectors
  • unbalanced: RCA (cinch)
  • symmetrical: TRS 6.3 (large jack), XLR (canon)

*when you connect the TS (mono jack) connector to the TRS input, you achieve an asymmetrical connection

• input sensitivity
  • symmetrical: 0 dBu
  • unsymmetrical: -15 dBV
• input impedance
  • symmetrical: 10 kΩ
  • unsymmetrical: 7 kΩ
• power (per monitor)
  • total: 50 W
  • bass: 30 W
  • treble: 20 W
• speakers/converters
  • bass: 5" with Glass Aramid diaphragm
  • tweeter: 1" Tweeter with silk canopy
• frequency range
  • 56 Hz - 30 kHz (+/- 3 dB)
  • 46 Hz - 34.5 kHz (-10 dB)
• peak Sound Pressure SPL: 101 dB
• maximum sound pressure SPL: 98 dB
• controls
  • volume: -30 dB to +6 dB
  • bass (200 Hz and below): -1 dB, FLAT, +1 dB, +2 dB
  • treble: (2.6 kHz and above): -2 dB, -1 dB, FLAT, +1 dB)
• power supply
  • internal power supply
  • voltage 120 - 240 V

• construction
  • enclosed with front bassreflex
  • material: 15 mm MDF
  • surface: black durable vinyl film
• mechanical properties (one piece)
  • dimensions (H x W x D) 29 x 22.6 x 33.2 cm
  • weight: 8,39 kg

• pair of Classic 5 monitors
• pair of XLR(m) - XLR(f) symmetrical signal cables
• two power cables
• pair of foam damping pads