The Optical HDMI 2.0 Ultra High-Speed 4K@60Hz cable serves as a connection between two audio/video devices using the modern HDMI interface, such as HD-DVD/BluRay players and LCD/Plasma televisions. This cable transmits digital audio and video signals and supports the digital content protection of HDCP.
Product Description
- HDMI 2.0b High-Speed active optical fiber cable
- Supports Ultra High Definition resolution of 4K@60Hz (2160p @ 60Hz), YUV 4:4:4
- Maximum data transfer rate: 18 Gb/s (600MHz) for HDMI 2.0 or 10.2Gb/s for HDMI 1.4
- Hybrid optical cable with a diameter of 4.5mm - 4x optical fibers OM3 + 7x conductors
- Gold-plated connectors: HDMI Type A (19 pins) male to HDMI Type A (19 pins) male
- Resolution: 3840 × 2160 pixels at 60Hz or lower supported formats of 1080p FULL HD/1080i/720p/720i
- Backward compatible with HDMI 2.0a, 2.0, 1.4, and lower versions
- Supports ARC, HEC, EDID, DDC
- Supports CEC (Consumer Electronics Control)
- Supports HDR (High Dynamic Range)
- Supports 4:4:4 color subsampling
- 3D video through HDMI connection
- Supports HDCP 1.4/HDCP 2.2
- Multi-Dimensional Audio Formats Supported (Dolby Atmos and DTS:X, etc.)
- Dolby TrueHD and DTS-HD Master Audio Bitstream Compatible
- Supports Audio Return Channel (ARC)
- Compatible with HDMI Ethernet Channel (HEC)
- Supports EDID
- Powered through HDMI bus, consumes less than 250mW, no external power needed
- Optical cable thickness: 5.2mm
- Optical fiber: OM3 Multimode Fibre Optic
- Gold-plated connectors in metal housings
- Flexible optical cable with a small bending radius of 20mm, optical cable cross-section: 4.6mm
- Color: black
- The optical cable is wound on a plastic reel, packaged in a cardboard box with a label and EAN code
- Cable length: 30m
The cable contains active electronics that function in only one signal direction. The cable should always be connected when devices are turned off and only in the direction indicated on the cable.
The connector labeled "Source" should always be plugged into the transmitting device (DVD, Blu-ray).
The connector labeled "Display" should always be plugged into the display device (LCD, TV, projector).
